|
|
Curved Surface Probe Holder
Holds 6.35-mm OD probes for measuring reflection
of curved surfaces. Rubber footing prevents scratching. Also
available is version for holding samples at 45º.
CSH: $127
CSH-45: $144 |
 |
 |
RPH-1 Probe Holder
The RPH-1 is an anodized aluminum
platform with holes at 45° and 90°. The RPH-1 holds 6.35-mm
diameter probes but with the RPH-ADP -- an adapter that fits on
the RPH-1 -- you can secure 3.17-mm (1/8") diameter probes as
well.
RPH-1: $104
RPH-ADP: $250 |
|
|
 |
RPH-2 Probe Holder
The RPH-2 is an anodized aluminum
platform with holes at 45° and 90°. The RPH-2 is for use with SMA
905 Connectors.
RPH-2: $120 |
|
|
 |
Fiber
Filter Holder
The FH-SMA holds 8-mm diameter filters or diffusers
in thicknesses of 1-7 mm and mounts onto the end of an SMA
905-terminated fiber.
FH-SMA: $167 |
|
|
|
|
In-line
Fiber Filter Holder
This fixture with two 74-UV lenses connects to two
fibers and holds filters 8 mm in diameter and 2-5 mm thick.
INLINE-FH:
$516 |
|
|
 |
FC
Barrel for FC-terminated Fibers
This barrel accepts FC-terminated fibers for use on
our lenses, lamps and other fixtures with a 6.35-mm OD SMA barel.
FCBARREL: $31 |
|
|
 |
Bulkhead
Bushing Assembly
The 21-01 SMA Bulkhead Bushing allows easy coupling
of an LED or photodiode in a TO-18 can to an SMA-terminated
optical fiber.
21-01: $11 |
|
|
 |
SMA
Splice Bushing
The 21-02 SMA Splice Bushing is an in-line adapter
that mates SMA 905-terminated fibers.
21-02:
$14
21-02-SS (Stainless Steel): $52 |
|
|
 |
SMA
Bulkhead Splice Bushing
The 21-02-BH SMA Bulkhead Splice Bushing is an
in-line adapter that mates SMA 905-terminated fibers on opposite
sides of a panel. The 21-02-BH features an O-ring for sealing and
a nut and lockwasher for mounting.
21-02-BH:
$25 |
|
|
 |
Modemixer
In-line, 3-mm Suprasil rod connects two SMA 905
fibers to mix core modes and eliminate clad modes (180-2100 nm).
ADP-SMA-SMA:
$317 |
|
|
 |
FVA
Fiber Optic Variable Attenuator
The FVA-UV is an opto-mechanical device that
controls the amount of light transmitted between two optical
fibers. Internal disc varies attenuation from 0-100%.
FVA-UV:
$577 |
|
|
 |
C-Mount
Adapter and SMA Connector
Our C-MOUNT Adapter has a connector in its center
for attaching probes with 6.35-mm OD ferrules; assembly connects
to optical systems such as microscopes and telescopes.
MFA-C-Mount:
$542 |
|
|
 |
C-Mount-MIC
Adapter
Our C-MOUNT-MIC Adapter Assembly with adjustable focusing barrel
has an SMA 905 Connector in its center for attaching to optical
fibers. The internal C-mount threads of this assembly allow you to
adapt fiber optic spectrometer systems to other optical devices
such as microscopes and telescopes.
Note - threads connecting to
microscope are male.
C-MOUNT-MIC: $146 |
|
|
 |
Phototubus
Microscope Adapter
MFA-PT adapts to a Phototubus outlet and accepts
SMA 905-terminated fibers.
MFA-PT:
$501 |
|
|
 |
In-line
TTL and Shutter
The INLINE-TTL is an electronic TTL shutter (5 Hz
maximum), which is screwed between two fibers and driven by a TTL
signal. A 12 VDC power supply is included.
INLINE-TTL-S:
$1272 |
|
|
|
In-line
Dual Switch
Switch between two parallel optical fiber lines for
easy reference and sample measurements with the FOS-2x2-TTL. It
works with one light source and eliminates the need for a second
spectrometer channel. You can use the FOS with a Bifurcated
Optical Fiber Assembly.
FOS-2x2-TTL:
$2144 |
|
|
|
Gershun
Tube Kit
The GER-KIT limits the field of view of an SMA
905-terminated fiber or USB2000 Spectrometer. Included apertures
provide a 1, 2, 3, 6, 8, 10, 14, 16, 20, or 28 degree field of
view. Follow this link for more information on the
GER-KIT.
GER-KIT:
$524 |
|
|
 |
Fiber
Wrench
The FOT-SMAWRENCH is a wrench that slips over the
hex nut of the SMA 905 Connectors used in our Laboratory-grade
Optical Fiber Assemblies.
FOT-SMAWRENCH: $13 |
|
|
|
|
Epoxy
Samples for Compatibility Testing
Use the EPOXY-TEST strips to test the compatibility
of the epoxy we use in our fiber terminations with your sample.
EPOXY-TEST:
No Charge |
